Insulated Klein-Kurve® Wire Stripper/Cutter
11054EINS
This product is no longer in production
- 1000 V Rated for safety on the job and VDE Certified; unique three-part insulation with white underlayer provides a warning sign that insulation may be compromised
- Cuts, strips, loops and gauges both solid and stranded wire
- Spring loaded for self-opening; serrated nose for easy bending, shaping and pulling of wire
- Cleanly shears 6-32 and 8-32 screws; do not use for cutting steel wire
- Made in USA
- Multi-color, sleek design with small thumbguards for ease of handling and easy storage in your toolbelt
- Durable, molded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools
Klein Tools Electrician's Insulated Solid and Stranded Stripper is 1000V rated and VDE certified for safety on the job. The multi-color, sleek design with small thumbguards make for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, molded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools.
Specifications
Type:
Insulated
Application:
8-16 AWG Solid and 10-18 AWG Stranded Copper Wire and Shearing 6-32 and 8-32 Screws
Special Features:
Compact and lightweight – Spring loaded for self-opening
Material:
Steel
Insulated:
Yes
Strips and Cuts:
8-16 AWG Solid, 10-18 AWG Stranded
Screw Shearing:
6-32 and 8-32
Wire Gauge:
8-16 AWG Solid, 10-18 AWG Stranded
Jaw Capacity:
0.75'' (1.9 cm)
Jaw Size:
0.25'' (0.6 cm)
Hold-Open Spring:
Yes
Standard:
IEC 60900 and ASTM F1505
Overall Length:
7.7'' (19.6 cm)
Overall Height:
1.2'' (3.1 cm)
Overall Width:
4.75'' (12.1 cm)
Handle Color:
Orange/Gray
Handle Finish:
3-Layer Insulation
Handle Material:
Multi-Layer Insulation
Weight:
8 oz (227 g)
UPC:
092644740107
Warnings
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source.
- Always inspect your tools before use.
- Always wear approved eye protection.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.