Chicago® Grip - Bell-System Type L Grip
1684-5AT
This product is no longer in production
- Identical to Bell-System type ''L'' strand puller
- For cable diameter range of 0.218 to 0.550-Inch (5.54 to 13.97 mm); Max Safe Load of 8000-Pound (3629 kg)
- Outside diameter of support wire includes thickness of polyethylene coating
- Equipped with chain, toggle and shackle to keep grip from falling off the cable
- Made in USA
- For support wire 0.134 and larger, refer to 1659 series
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. Identical to Bell-System type L strand puller. Equipped with chain, toggle and shackle. For support wire 0.134-Inch and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.
Specifications
Type:
Chicago Grip
Application:
Wire Pulling
Special Features:
''L'' Strand Puller -- Equipped With a Chain, Toggle and Shackle
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
N
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Double V
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.9 lb (3.12 kg)
UPC:
092644471636
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
